CIP Code: 40.0101

ctcLink Plan Code: PHST2AS

Total Credits: 101

1. College Success

• COLLG 110 College Success (3 credits)

• Course purpose: A foundational course to explore and affirm a career choice and build upon the skills, knowledge, and resources that will support you at Pierce College and beyond.

•  

• Note: 

  • Successfully completing either COLLG 110 or COLLG 115 will fulfill the College Success requirement. 

  • A COLLG 110 course grade can only be replaced with a grade from another COLLG 110 course and a COLLG 115 course grade can only be replaced with a grade from another COLLG 115 course. 

2. English Composition I

• ENGL& 101 English Composition I (5 credits)

• Course purpose: Engineers write technical reports, grants, instructions and proposals to colleagues, clients and supervisors. ENGL& 101 provides the foundational skills needed to write effectively.

•  

• Note: Your advisor will assist you in reviewing your Guided Self Placement and selecting either the 5-credit or the 7-credit co-requisite ENGL& 101 + ENGLC 101 course. 

3. Math Course Recommendation

Take one course per quarter until sequence is finished.

• MATH& 141 Precalculus I (5 credits)
• MATH& 142 Precalculus II (5 credits)
• MATH& 151 Calculus I (5 credits)

• Note: The Calculus sequence starting with Calculus II (MATH& 152, MATH& 163 and MATH&264) can be taken concurrently with the physics sequence (PHYS& 221, PHYS& 222, PHYS&223) in a linked learning community. This linked learning community is highly recommended for any student taking Physics 221, who has not previously taken Math 152. Check the Course Schedule and talk with your advisor to see if this option is right for you.

• MATH& 152 Calculus II (5 credits)
• MATH& 163 Calculus 3 (5 credits)

• Note: MATH& 153 may be used as a substitute for MATH& 163.  Please check with your transfer institution to determine how this substitution may impact your transfer-readiness.

•  

• Course Purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications.

•  

• Note: The math course you select will depend on the Career Pathway Map you are following, the transfer institution/degree that you select, and your math placement guidance. Your advisor will assist you in selecting the relevant 5 or 7 credit course(s) based upon co-requisite options.

•  

• Transfer Note: MATH& 151, MATH& 152, and MATH& 163, with a minimum 2.0 in each, are prerequisites for University of Washington, Tacoma’s Mechanical Engineering, B.S., and transfer as TMATH 124, TMATH 125, and TMATH 126, respectively. 

Action Item: Meet with Advisor

Use your Success Network!  In your first quarter, meet with your advisor to revisit your career and transfer path, make adjustments to your goals as needed, and plan for your next steps. 

Action Item: Choose Transfer Institution

Set up a meeting with a faculty member to discuss engineering pathway options. Work with an advisor or faculty member to plan your transition to a Bachelor of Science engineering program at a four-year institution and confirm transfer requirements.  

University of Washington, Seattle admits Aeronautical and Astronautical, Civil, and Mechanical Engineering students for a fall start. For a fall start, you need to apply to University of Washington,Seattle in February  and to the department in April.    

University of Washington, Tacoma, admits Civil and Mechanical Engineering students for Fall quarter only. You must first apply to the university before you can apply to the department. The university priority admission review deadline is in March and the priority deadline to apply to the program is in July. 

Washington State University admits Civil and Mechanical Engineering students for fall semester. You should contact the academic advisor of the transfer department before applying. The priority deadline to apply for Fall start is in August. 

Saint Martin’s University admits CE and ME students for fall or summer quarters. The deadline to apply for summer start is May 15. The deadline to apply for fall start is August 10. 

4. Engineering Graphics

• ENGR& 114 Engineering Graphics (5 credits)

• Course purpose: Engineers need drawing and modeling skills to design new products, structures, etc. Engineers need to hand-draw objects and read designs that meet industry standards. For design, engineers use computer software to create 3D models as well as run simulations. Skills learned in this course are needed in higher-level courses and capstone projects at transfer institutions.

   

  Note:  

  • Graduation requirement for Civil Engineering at Washington State University and Saint Martin’s University  

  • Graduation requirement for Mechanical Engineering at University of Washington, Seattle and Saint Martin’s University  

  • Elective for Civil Engineering at University of Washington, Seattle 

  • Required for Mechanical Engineering at Washington State University 

5. Chemistry Course Recommendation

Take one course per quarter until sequence is finished.

• CHEM& 139 General Chemistry Prep (5 credits)
• CHEM& 161 General Chemistry w/Lab I (5 credits)

• Transfer Note: CHEM& 161 with a minimum of a 2.0, is a prerequisite for University of Washington, Tacoma’s Mechanical Engineering, B.S., and transfer as TCHEM 142. 

• CHEM& 162 General Chemistry w/Lab ll (5 credits)

• Course purpose: Aeronautical/Astronautical, Mechanical and Civil Engineers need a strong background in chemistry. In design, engineers must choose the proper material to use for an application. Knowledge of chemical structure provides insight into the material properties. Engineers must apply chemical laws to processes such as those seen in engines. 

• Note:  

• CHEM& 161 and CHEM&162 are required for Mechanical Engineering at University of Washington, Seattle and Washington State University 

• Only CHEM& 161 is required for Aeronautical/Astronautical Engineering at University of Washington, Seattle  

• Only CHEM& 161 is required for Civil Engineering and Mechanical Engineering at University of Washington, Tacoma  

• CHEM& 161 and CHEM&162 are required for Civil Engineering at Washington State University 

• CHEM&162 is a Graduation requirement for Civil Engineering at University of Washington, Seattle. It is recommended you take both at Pierce College to ensure transfer of credits. 

• CHEM& 161 and CHEM& 162 are graduation requirements for Civil and Mechanical Engineering at Saint Martin’s University. It is recommended you take both at Pierce College to ensure transfer of credits. 

6. Physics Course Recommendation

Take one course per quarter until sequence is finished.

Note: MATH& 152 must be taken before or concurrently with PHYS& 221.The Calculus sequence starting with Calculus II (MATH& 152, MATH& 163 and MATH&264) can be taken concurrently with the physics sequence (PHYS& 221, PHYS& 222, PHYS&223) in a linked learning community. This linked learning community is highly recommended for any student taking Physics 221, who has not previously taken Math 152. Check the Course Schedule and talk with your advisor to see if this option is right for you.

• PHYS& 221 Engineering Physics I (6 credits)
• PHYS& 222 Engineering Physics II (6 credits)
• PHYS& 223 Engineering Physics III (6 credits)

• Course purpose: Engineers need a strong foundation in physics in order to apply these physics concepts to engineering applications. 

•  

• Transfer Note: PHYS& 221, PHYS& 222, and PHYS& 223, with a minimum of a 2.0 in each, are prerequisites for University of Washington, Tacoma’s Mechanical Engineering, B.S., and transfer as TPHYS 121, TPHYS 122, and TPHYS 123, respectively. 

7. Engineering Course Recommendation

Take one course per quarter until sequence is finished.

• ENGR& 214 Statics (5 credits)
• ENGR& 215 Dynamics (5 credits)
• ENGR& 225 Mechanics of Materials (5 credits)

• Course purpose: Engineers need to learn foundational engineering concepts that are taught in these classes. You will apply concepts learned in math and physics to real-world examples. Skills learned in the engineering sequence are needed in higher-level courses taken at transfer institutions.

   

  Note: 

  • Required for AA and Mechanical Engineering at University of Washington and Washington State University
  • Required for Civil Engineering at University of Washington
  • Graduation requirements for Civil Engineering and Mechanical Engineering at Saint Martin’s University
  • ENGR& 214 is required for Civil Engineering at Washington State University
  • ENGR&215 and ENGR&225 are graduation requirements for Civil Engineering at Washington State University

•  

• Note:  

  • Required for Aeronautical/Astronautical Engineering and Mechanical Engineering at University of Washington, Seattle and Washington State University 

  • Required for Mechanical Engineering at Washington State University 

  • Required for Civil Engineering and Mechanical Engineering at University of Washington, Tacoma 

  • Required for Civil Engineering at University of Washington, Seattle and Washington State University 

  • Graduation requirements for Civil Engineering and Mechanical Engineering at Saint Martin’s University 

  Transfer Note: ENGR& 214, ENGR& 225, ENGR& 215 with a minimum of a 2.0 in each, are prerequisites for University of Washington, Tacoma’s Mechanical Engineering, B.S., and transfer as TME 221, TME 1222, TME 223, respectively. 

Action Item: Apply for Graduation

Way to go!  It is time to apply for graduation.  Visit the Pierce College Graduation website for details. 

8. Humanities Course Recommendation

Choose one

• CMST& 230 Small Group Communication (5 credits)

• Course purpose: Engineers will work in teams in their careers. CMST& 230 provides the skills needed to handle group conflicts and discusses different leadership styles.

• CMST& 240 Intercultural Communication (5 credits)

• Course purpose: Engineers must interact with clients and colleagues from around the world in today’s global economy. This course teaches you about different worldviews and skills to interact with technology.

• CMST& 220 Fundamentals of Public Speaking (5 credits)

• Course purpose: Engineers must be able to present proposals, results and conclusions to clients, supervisors and laypeople. This course provides you with practice in public speaking.

  Note: CMST& 220 is Required for Civil Engineering at Washington State University 

9. Economics Course Recommendation

Choose one

• ECON& 201 Microeconomics (5 credits)
• ECON& 202 Macroeconomics (5 credits)

• Course purpose: Engineers should understand the impact of their designs on the economy and the factors that influence funding and companies.

   

  Note: 

  • Meets economics course requirement at many transfer institutions
  • For Mechanical Engineering at Washington State University, take ECON& 202.

10. Social Science Course Recommendation

Course purpose: Engineers should understand the role engineering designs plays in society and culture, and must work in diverse teams with colleagues of various backgrounds. Choose one course based on transfer institution and interest. 
 

Choose One

• ANTH& 100 Survey of Anthropology (5 credits)
• ANTH& 206 Cultural Anthropology (5 credits)
• SOC 235 Race and Ethnicity (5 credits)
• SOC& 101 Introduction to Sociology (5 credits)
• SOC& 201 Social Problems (5 credits)
• SOC 211 Family and Intimate Relationships (5 credits)
• HIST& 128 World Civilizations III (5 credits)

• Note: SOC& 201 meets diversity course requirement at University of Washington, Seattle. SOC& 101 and SOC& 235 meets diversity course requirement at University of Washington, Tacoma. ANTH& 100, ANTH &206, and SOC 211 meets diversity course requirement at Washington State University. HIST& 128 meets the History ROOT requirement at Washington State University. 

11. Recommended Additional Writing Course

Choose one based on transfer institution

• ENGL& 235 Technical Writing (5 credits)

• Course purpose: Engineers must write technical reports to effectively convey ideas, findings, proposals, instructions, etc. 

    

  Note: 

  • Graduation requirement for Civil Engineering at University of Washington, Seattle and Washington State University 

  • Graduation Requirement for Mechanical Engineering at Washington State University 

  • Preparatory course for Mechanical Engineering and Aeronautical/Astronautical Engineering at University of Washington, Seattle 

  • Not accepted at St. Martin’s University

• ENGL& 102 Composition II: Argumentation and Research (5 credits)

• Course purpose: Engineers need to effectively research solutions and argue for their application. 

    

  Note:  Graduation requirement for Civil Engineering and Mechanical Engineering at St. Martin’s University

Total Credits: 106

12. Additional Recommended Courses

Please refer to the transfer notes of each section/course below, and connect with your advisor, to determine which additional courses you should take based on your intended transfer institution. 
 

• MATH& 264 Calculus 4 (5 credits)

• Course purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications. 

   

  Note: MATH 224 may be used as a substitute for MATH& 264.  Please check with your transfer institution to determine how this substitution may impact your transfer-readiness. 

  Course purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications. 

    

  Note:  

  • Required for Aeronautical/Astronautical Engineering at University of Washington, Seattle 

  • Elective for Graduation for Mechanical Engineering at University of Washington, Seattle 

  • For Civil Engineering at University of Washington, Seattle, check if MATH& 264 is needed

  • Required for Mechanical Engineering at University of Washington, Tacoma 

  • Required for Civil Engineering and Mechanical Engineering at Washington State University 

  • Graduation requirement for Mechanical Engineering at St. Martin’s University 

• MATH 205 Linear Algebra (5 credits)

• Course purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications. 

    

  Note:  

  • Required for Aeronautical/Astronautical Engineering, Civil Engineering at University of Washington, Seattle 

  • Graduation requirement for Mechanical Engineering at University of Washington, Seattle 

  • Preparatory course for Civil Engineering and Mechanical Engineering at University of Washington, Tacoma 

  • Required for Civil Engineering and Mechanical Engineering at Washington State University 

  • Either take MATH 205 or MATH 238 for Mechanical Engineering at St. Martin’s University 

• MATH 238 Differential Equations (5 credits)

• Course purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications. 

    

  Note:  

  • Required for Aeronautical/Astronautical Engineering at University of Washington, Seattle 

  • Graduation requirement for Civil Engineering and Mechanical Engineering at University of Washington, Seattle 

  • Required for Civil Engineering and Mechanical Engineering at University of Washington, Tacoma 

  • Required for Civil Engineering and Mechanical Engineering at Washington State University 

  • Graduation requirement for Civil Engineering and Mechanical Engineering at St. Martin’s University 

  • Either take MATH 205 or MATH 238 for Mechanical Engineering at St. Martin’s University 

   

  • Transfer Note: MATH 238, with a minimum 2.0, is a prerequisite for University of Washington, Tacoma’s Mechanical Engineering, B.S., and transfer as TMATH 307.  

• ENGR& 224 Thermodynamics (5 credits)

• Course purpose: Engineers need to learn about property changes, heat engines, refrigerator, gas and diesel engines and different power cycles to apply to them to power plants, engines and other systems. ME and AA must have a strong background in Thermodynamics and its importance in different systems. 

    

  Note:  

  • Required for Aeronautical/Astronautical Engineering at University of Washington, Seattle 

  • Elective for Civil Engineering at University of Washington, Seattle and Washington State University 

  • Required for Mechanical Engineering at Washington State University 

  • Not accepted for Civil Engineering and Mechanical Engineering at St. Martin’s University but is recommended 

  • Not accepted for Mechanical Engineering at University of Washington, Seattle but helps prepare students 

  • Not accepted for Mechanical Engineering at University of Washington, Tacoma but is highly recommended by University of Washington, Tacoma’s faculty 

   

• ENGR& 204 Electrical Circuits (6 credits)

• Course purpose: Engineers should have a background in electrical circuits to apply to control systems and instrumentation. 

    

  Note:  

  • Graduation requirement for Mechanical Engineering at University of Washington, Seattle and University of Washington, Tacoma 

  • Required for Mechanical Engineering at Washington State University 

  • Elective for Civil Engineering at University of Washington, Seattle

  • Preparatory course for Aeronautical/Astronautical Engineering at University of Washington, Seattle and Civil Engineering at St. Martin’s University 

• GEOL& 101 Introduction to Physical Geology (5 credits)

•  

  Note: 

  • A non-Physics or non-Chemistry lab science course is a Graduation Requirement for Civil Engineering at University of Washington, Tacoma 

Recommended Computer Programming Courses

Course purpose: Engineers must utilize scientific computing tools in today’s modern economy. These courses teach students computer programming to perform mathematical operations, graphing and data analysis. The computer programming language taught in this course will be used in future courses at transfer institutions. 

Check transfer notes to determine whether you need to choose 1 or 2 courses  

• ENGR 250 Applied Numerical Methods in Engineering (5 credits)

• Note:  

  • ENGR 250 is a Graduation requirement for Mechanical Engineering at University of Washington, Seattle 

  • ENGR 250 is required for Aeronautical/Astronautical Engineering at University of Washington, Seattle 

  • 5 credits of Computer Programming Required for Civil Engineering and Mechanical Engineering at University of Washington, Tacoma (Will accept any of the 3 recommended courses, ENGR 250, CIS 122, or CS& 141., ENGR 250 is preferred as students will use the same language in their courses at University of Washington, Tacoma) 

  • ENGR 250 is Required for Mechanical Engineering at Washington State University (CS141 is a substitute, ENGR 250 is preferred) 

  • Not accepted at Saint Martin’s University 

  • ENGR 250 is Required for Civil Engineering at University of Washington, Seattle (CS141 is a substitute, ENGR 250 is preferred) 

  • ENGR 250 is a Graduation requirement for Civil Engineering at Washington State University 

• CIS 121 Introduction to Computer Information Systems (5 credits)

• This course is a prereq for CIS 122, which otherwise requires instructor permission.

• CS& 141 Computer Science I (5 credits)

Biology Requirement for Civil Engineering at Washington State University

Choose One

• BIOL& 100 Survey of Biology (5 credits)
• BIOL& 160 General Biology w/Lab (5 credits)

• Note: 

  • One of these two courses is a Requirement for Civil Engineering at Washington State University 

Adjusted Total: 132-142

CIP Code: 40.0101

ctcLink Plan Code: PHST2AS