ctcLink Plan Code: LRST1AS

CIP Code: 24.0101

Total Credits: 109-111

1. College Success

• COLLG 110 College Success (3 credits)

• Course purpose: A foundational course to explore and affirm a career choice and build upon the skills, knowledge, and resources that will support you at Pierce College and beyond.

•  

• Note: The College Success course you select will depend on the Career Pathway Map you are following. Your advisor will assist you in selecting either the 3- or 5- credit version of the course. Should you choose to repeat a College Success course you must enroll in a College Success course with the same credit amount as the original course; a COLLG 110 course grade can only be replaced with a grade from another COLLG 110 course and a COLLG 115 course grade can only be replaced with a grade from another COLLG 115 course. 

2. Math Course Recommendation

Take one course per quarter until sequence is finished.

• MATH& 141 Precalculus I (5 credits)
• MATH& 142 Precalculus II (5 credits)
• MATH& 151 Calculus I (5 credits)

• Note: The Calculus sequence starting with Calculus II (MATH& 152, MATH& 163 and MATH&264) can be taken concurrently with the physics sequence (PHYS& 221, PHYS& 222, PHYS&223) in a linked learning community. This linked learning community is highly recommended for any student taking Physics 221, who has not previously taken Math 152. Check the Course Schedule and talk with your advisor to see if this option is right for you.

• MATH& 152 Calculus II (5 credits)
• MATH& 163 Calculus 3 (5 credits)

• Note: MATH& 153 may be used as a substitute for MATH& 163.  Please check with your transfer institution to determine how this substitution may impact your transfer-readiness.

•  

• Course Purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications.

•  

• Note: The math course you select will depend on the Career Pathway Map you are following, the transfer institution/degree that you select, and your math placement guidance. Your advisor will assist you in selecting the relevant 5 or 7 credit course(s) based upon co-requisite options.

3. English Composition I

• ENGL& 101 English Composition I (5 credits)

• Course purpose: Engineers write technical reports, grants, instructions and proposals to colleagues, clients and supervisors. ENGL& 101 provides you the foundational skills needed to write effectively.

•  

• Note: Your advisor will assist you in reviewing your Guided Self Placement and selecting either the 5-credit or the 7-credit co-requisite ENGL& 101 + ENGLC 101 course. 

Action Item: Meet with Advisor

Use your Success Network!  In your first quarter, meet with your advisor to revisit your career and transfer path, make adjustments to your goals as needed, and plan for your next steps. 

Action Item: Choose a Transfer Institution

Work with an advisor or faculty member to plan your transition to a Bachelor of Science engineering program at a four-year institution.

UW-Seattle admits bioengineering and chemical engineering students for a Spring start. For a Spring start, you need to apply to UW-Seattle by December 15 and to the department by January 15.  

WSU admits bioengineering and chemical engineering students for Fall or Summer quarters. You should contact the academic advisor of your transfer department before applying. The deadline to apply for Fall or Summer start at WSU is January 31.

4. Chemistry Course Recommendation

Take one course per quarter until sequence is finished.

• CHEM& 139 General Chemistry Prep (5 credits)
• CHEM& 161 General Chemistry w/Lab I (5 credits)
• CHEM& 162 General Chemistry w/Lab ll (5 credits)
• CHEM& 163 General Chem w/Lab III (5 credits)

• Course purpose: BioE and ChemE Engineers need a strong background in chemistry. In design, engineers must choose the proper material to use for an application. Knowledge of chemical structure provides insight into the material properties and how materials interact with the body/environment.

   

  Note: CHEM&161, 162, 163 is required for Bioengineering and Chemical Engineering at University Washington and Washington State University. 

5. Biology/Chemistry Course Recommendation

Choose one group.

Action Item: Apply for Graduation

Way to go!  It is time to apply for graduation.  Visit the Pierce College Graduation website for details.  https://www.pierce.ctc.edu/graduation

6. Physics Course Recommendation

Take one course per quarter until sequence is finished.

• PHYS& 221 Engineering Physics I (6 credits)
• PHYS& 222 Engineering Physics II (6 credits)
• PHYS& 223 Engineering Physics III (6 credits)

• Course purpose: Engineers need a strong foundation in physics in order to apply these physics concepts to engineering applications.

   

  Note: 

  • MATH& 152 must be taken before or concurrently with PHYS& 221.  The Calculus sequence starting with Calculus II (MATH& 152, MATH& 163 and MATH&264) can be taken concurrently with the physics sequence (PHYS& 221, PHYS& 222, PHYS&223) in a linked learning community. This linked learning community is highly recommended for any student taking Physics 221, who has not previously taken Math 152. Check the Course Schedule and talk with your advisor to see if this option is right for you. 
  • PHYS & 221 – 223 meet University of Washington’s PHYS 121, 122, and 123 transfer requirements for chemical engineering and bioengineering program.  
  • Bioengineering at University of Washington only requires UW’s PHYS 121 and 122, but students can only earn PHYS 122 credits by completing our PHYS& 223 course. It is recommended that you complete the sequence (PHYS&221, 222, 223) at Pierce College to ensure transfer of credits.
  • Chemical engineering and Bioengineering at WSU should complete the sequence.  

7. Humanities Course Recommendation

Choose One

• CMST& 230 Small Group Communication (5 credits)

• Course purpose: Engineers will work in teams in their careers. CMST& 230 provides you the skills needed to handle group conflicts and discusses different leadership styles.

• CMST 105 Intercultural Communication (5 credits)

• Course purpose: Engineers must interact with clients and colleagues from around the world in today’s global economy. This course teaches you about different worldviews and skills to interact with technology.

• CMST& 220 Fundamentals of Public Speaking (5 credits)

• Course purpose: Engineers must be able to present proposals, results and conclusions to clients, supervisors and laypeople. This course provides you with practice in public speaking.

8. Economics Course Recommendation

Choose one

• ECON& 201 Microeconomics (5 credits)
• ECON& 202 Macroeconomics (5 credits)

• Course purpose: Engineers should understand the impact of their designs on the economy and the factors that influence funding and companies.

   

  Note: ECON& 201 or 202 is required for transfer to Washington State University. 

9. Social Science Course Recommendation

Choose one

• ANTH& 206 Cultural Anthropology (5 credits)

• Course purpose: Engineers should understand the role engineering designs plays in society and culture.

• SOC 235 Race and Ethnicity (5 credits)
• SOC 220 Gender Roles in Society (5 credits)

• Course purpose: Engineers must work in diverse teams with colleagues of various backgrounds.

   

  Note: Meets diversity course requirement at University of Washington and Washington State University. 

Total Credits: 109-111

10. Additional Recommended Courses

• CHEM& 261 Organic Chemistry w/Lab I (6 credits)

• Course purpose: In design, engineers must be able to choose the proper material to use for an application. Knowledge of chemical structure provides insight into the material properties and how materials interact with the body/environment.

   

  Note: 

  • If transferring for Bioengineering at UW, only CHEM&261 is required 

  • If transferring for Bioengineering at WSU, CHEM&261/262/263 are electives 

  • if transferring for Chemical Engineering at UW, CHEM&261/262 are graduation requirements, but CHEM&263 is an elective 

• MATH& 264 Calculus 4 (5 credits)

• Note: MATH 224 may be used as a substitute for MATH& 264.  Please check with your transfer institution to determine how this substitution may impact your transfer-readiness.

   

  Note: 

  • Required for Bioengineering and Chemical Engineering at UW 

  • Required for Chemical Engineering at WSU 

  • Graduation requirement for Bioengineering at WSU 

• MATH 205 Linear Algebra (5 credits)

• Note:

  • Graduation requirement for Bioengineering and Chemical Engineering at UW 

  • Elective for Bioengineering and Chemical Engineering at WSU 

• MATH 238 Differential Equations (5 credits)

• Course purpose: Engineers need a strong foundation in math in order to apply these math concepts to engineering and physics applications.

   

  Note:

   

  • Required for Chemical Engineering  at University of Washington

  • Graduation requirement for Bioengineering  at University of Washington

  • Graduation requirement for Chemical Engineering at Washington State University 

  • Elective for Bioengineering at Washington State University

• ENGR& 114 Engineering Graphics (5 credits)

• Course purpose: Engineers need drawing and modeling skills to design new products, structures, etc. Engineers need to hand-draw objects and read designs that meet industry standards. For design, engineers use computer software to create 3D models as well as run simulations. Skills learned in this course are needed in higher-level courses and capstone projects at transfer institutions.

   

  Note: Elective for Bioengineering at University of Washington and Washington State University

• ENGR 250 Applied Numerical Methods in Engineering (5 credits)

• Course purpose: Engineers must utilize scientific computing tools in today’s modern economy. This course teaches students computer programming to perform mathematical operations, graphing and data analysis. The computer programming language taught in this course will be used in future courses at transfer institutions. 

   

  Note: 

  • Required for Bioengineering  at University of Washington

  • Graduation requirement for Chemical Engineering at University of Washington 

• ENGR& 214 Statics (5 credits)

• Note:

  • ENGR&214 is a graduation requirement for Bioengineering at Washington State University

  • Elective for Bioengineering and Chemical Engineering at University Washington 

• ENGR& 215 Dynamics (5 credits)

• Note:

  • Elective for Bioengineering and Chemical Engineering at University of Washington

  • Elective for Bioengineering  at Washington State University 

• ENGR& 225 Mechanics of Materials (5 credits)

• Course purpose: Engineers need to learn foundational engineering concepts that are taught in these classes. You will learn how to apply concepts learned in math and physics to real-world examples.

   

  Note: Elective for Bioengineering and Chemical Engineering at University of Washington

• ENGR& 224 Thermodynamics (5 credits)

• Course purpose: Chemical engineers must be able to analyze systems and processes.

   

  Note: 

  • Elective for Bioengineering and Chemical Engineering at Washington State University 

  • Preparatory course for Chemical Engineering at University of Washington

  • Not accepted at University of Washington for credit 

• ENGR& 204 Electrical Circuits (6 credits)

• Course purpose: Engineers should have a background in electrical circuits to apply to control systems and instrumentation.

   

  Note: 

  • Elective for Chemical Engineering at University of Washington

  • Graduation requirement for Bioengineering at Washington State University 

• ENGL& 235 Technical Writing (5 credits)

• Course purpose: Engineers must be able to write technical reports to effectively convey ideas, findings, proposals, instructions  etc.

   

  Note: 

  • Graduation requirement for Bioengineering and Chemical Engineering at Washington State University

  • Graduation requirement for Chemical Engineering at University of Washington

Total Adjusted Credits: 166-168

Total Credits: 109-111

CIP Code: 24.0101

ctcLink Plan Code: LRST1AS